SentrySafe SFW123FSC Owner's Manual download pdf (Page 3)

4 5

English

NOTE:•Store combination (and keys if equipped) in a secure

location (other than in the safe).

 •Combination can not be changed.

Ensure any shipping screws have been removed. Located on

the inside of the door.

NOTE: Your unit may or may not have a shipping screw..

 •DO NOT RETURN! Questions or concerns, call us at

1-800-828-1438.

Find your combination on the back of this owner’s manual.

FOR DUAL KEY/COMBINATION LOCKS ONLY

Keys are located inside your safe. Be sure to remove them

before locking your safe.

WARNING

Test your combination several times before putting valuables inside.

FOR DUAL KEY/COMBINATION LOCKS ONLY, insert key into

the lock, turn to the ’unlocked’ position, then remove the key.

This is a secondary locking feature not an override key.

The key needs to be in the vertical unlocked position to open

the safe.

Rotate dial to ’0’, then rotate right (clockwise)

passing ’0’ three times, continue rotating until you reach the

ﬁrst number in your combination.

Rotate dial to the left (counterclockwise). Go PAST the second

number of your combination ONCE and stop the SECOND time

the dial reaches the number.

Mechanical Combination Lock

M100TEST

SN100TEST01*

10-22-33

RLR

2075

Preparing your safe for ﬁrst time use

Unlocking your safe

Rotate the dial to the right (clockwise), stop when you reach

the third number in your combination.

Rotate the handle downward to open the door.

This may take a limited amount of force if you have a

water-resistant safe.

NOTE: •Make sure the handle is rotated all the way up in the horizontal position before

unlocking the safe.

 •If the door does not open easily, repeat steps 1-5.

 •If you exert too much force on the handle, the handle will move without moving the

bolts. If this happens, you will hear a ’click.’ DO NOT be alarmed. This feature is

designed to protect the bolts from being overpowered by force. If this occurs, simply

exert force in the opposite direction (lifting up) until the handles ’clicks’ back into place

and repeat steps 1-5 to open your safe.

Close the door and pull the handle upward until the handle

is horizontal.

For water-resistant units, additional pressure to the front,

left side of the door may need to be applied prior to rotating

the handle.

Spin the dial at least 2x to the right (clockwise).

FOR DUAL KEY/COMBINATION LOCKS ONLY, insert key

into the lock, turn to the ’locked’ position, then remove the key.

Locking your safe

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

SentrySafe SFW123FSC Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Safes SentrySafe SFW123FSC